HPGE bar screen for sewage filtration is a widely used and highly
recognized dirt pretreated and blocked equipment in the wastewater
treatment. It can be applied for municipal sewage, drainage pumping
plant, urban wastewater, industry wastewater, etc.
It consists of transmission device, rake chain system, supporting
frame and screenings removal mechanism.
Main machine frame is welded to special assembly platform according
to the JB/ZQ4000.3-86 General technical conditions for welding
parts. Tooth is made of quality stainless steel or nylon and is
formed through primary stamping by using mound and punching
machine. Tooth rake is a large rotational plane composed of many
small tooth rakes. Nylon shall be used as isolation pad to ensure
spacing between teeth.
This mechanical rotary fine bar screen is an overall net composed
of several small teeth. Under the driving by chain, it does screen
work from bottom to top. It discharges dregs by means o self-weight
of screening and removal device.
Brief introduction
The Chain Driven Bar Screens are the mostly preferred screening
equipment for removal of solids sizing in a wide range. They are
specially designed for installation as coarse and fine screens for
medium and large sized water and wastewater treatment plants. Chain
Driven Bar Screen “AME” is mainly consisting of bar screens, frame,
dead plate and discharge chute which is equipped with a ladle rake
and a counter cleaning mechanism
| Place of Origin: | Sichuan, China |
| Brand Name: | Customized |
| Warranty: | 1 year |
| Application: | Hydropower Plant |
| Certificate: | ISO9001 |
| Lifetime | 35 years |
YMGS Mechanical Bar Screen has the below advantages:
High Automaticity-can work continuously without any operation
High Separative Effiency
Low Power Consumption
No Noise
Good Corrosion Resistance
Self-Protection---when overload,it will give sound-light alarm and
stop working automatically
Can work based on different setting
Self Control and Manual Control
Self Cleaning
Woking Principle:
The bar screens are cleaned by the help of a ladle rake which is
connected to an endless chain operating between two sprockets. The
ladle rake is lowered down to the bottom of the channel in open
position. It is closed at the bottom to clean the debris which is
settled on the screen bars and moves up. The collected debris in
the ladle rake is cleaned by a counter wiper when the ladle rake
reaches to discharge point. Here the screenings are either removed
to a container or a transporter for further processing.
wastewater treatment mechanical bar screens
